Automatic Sliding Gates – Precision, Strength & Smart Automation 

Reliance Fabrication, established in 1974, is one of India’s most trusted names in the manufacturing of high-quality automatic sliding gates designed for long-term durability, smooth movement, and advanced security. Our automatic sliding gates are engineered using premium square and rectangular hollow sections, MS sheets, and precision-welded structural components that deliver exceptional strength and perfect alignment. 

The galvanised adjustable guide brackets, smooth-glide nylon rollers, strong safety guide posts, and Italian-made galvanised wheels with ball bearings work together to ensure effortless, silent, and vibration-free movement. The axle system is reinforced with lubrication points, allowing the gate to operate with minimal maintenance while maintaining long-term reliability. The entire structure is carefully balanced and tested to deliver smooth, uniform travel from end to end.

Reliance Fabrication integrates world-class automation systems certified under international safety and performance standards. All motors and controls used in our automatic sliding gates are CE certified and manufactured according to EN 13241:2003 + A2:2016 safety directives, along with compliance to 2006/42/CE and 2004/108/CE standards. This ensures that every gate offers safe, powerful, and weather-resistant automated operation suitable for industrial, commercial, and residential environments.

 
 

Cantilever Gate system is a arrangement for sliding gates which is suitable for safeguarding industrial, commercial and public conveniences, where the road surfaces are rough or sloping. The gate is made-up of robust steel and works on a modest principle of 2 heavy duty carriages grouted and a massive galvanized track that rolls on the carriages, thus avoiding the need for a bottom track.

  • Cantilevered Sliding Gates accessible for a span of up to 36 m appropriate for securing commercial, industrial & public utilities.
  • The benefit of using cantilevered gates is that they have no ground track or foundation in the roadway hence vehicle does not experience any collisions
  • Ideal for road surfaces which are uneven or sloping.
  • Gate is not susceptible to to getting blocked by leaves or dirt hence reduced maintenance.
  • Flat, quiet action due to no supports at the bottom of the gate.

Motorized sliding gates (conventional) are gates which use a ground mounted track for the gate wheels to move on. Tracked sliding gates can have larger opening widths. A pedestrian gate can be combined with these type of gates or a separate pedestrian gate can be built. Company can produce motorized sliding gates as per client’s requirements.

  • Planned and fabricated with superior square or rectangular hollow sections, along with MS sheets and flats collected by high quality welding
  • Gates are beautifully designed and the pre-tensioning of the gate leaf construction diminishes the risk of bending
  • Varied choice of models for gates weighing from 300 kg to 25000 kg
  • Manual operation in case of power failure
  • Highly condensed dimensions & very silent operation. Built-in anti jerk device stops damage to the automatic system
  • Startup at extreme power permits the motor to overcome any initial friction caused by ice, dust, etc. Motor protected by an internal thermal switch
  • Problem detection causes the gate movement to stop if an hindrance is detected
  • The advance electronic control unit licenses operation time adjustment, partial opening, reflex closing, step by step control, stop safety, reverse safety etc.

Gate Type

Applications

Maximum Clear Width

Maximum Height

Opening Direction

Opening Speed

Closing Speed

Security Features

Cantilever Sliding Gates

Industrial, Residential, Commercial, Warehouse, Airport, Shipyards, Railway or Any Entrance

18000mm Single Leaf / 36000mm Double leaf (Bi-Parting)

2500 mm (*Larger dimensions available on request)

Horizontal Straight

Up to 0.16 m/s (*Up to 0.3 m/s on request)

Up to 0.16 m/s (*Up to 0.3 m/s on request)

CE marked according to the European Machinery Directive 2006/42/CE &
Type tested according to EN 13241-1

SPECIFICATIONS

ADDITIONAL ACCESSORIES

Connecting Voltage

   230V-1ph, N / 415V-3ph, N

Drive Unit

   Rack driven rugged and powerful drive unit with integral electronic control unit

Operation

   Open / Emergency Stop / Close

Capacity

  300Kg to 25000Kg

Duty Class

  Intensive use

Opening Zone Monitoring

Pair of Reverse Safety photocells

Door Operated Controls

Key Selector, Remote Transmitter

Safe For Personnel And Equipment

Vertical Safety Edge

Interlocking System

Between Gate & Boom Barriers or equipped with a client control unit

Scroll to Top